Ubiquiti

The Ubiquiti UISP UFiber XGS Optical Transceiver is a high-performance SFP+ (Small Form-factor Pluggable Plus) module designed for XGS-PON and XG-PON OLT (Optical Line Terminal) applications. It supports single-mode fiber connections via an SC/UPC connector and enables high-speed data transmission with up to 10 Gbps downstream and 10 Gbps upstream for XGS-PON, and up to 10 Gbps downstream and 2.5 Gbps upstream for XG-PON. Form Factor: SFP+ Connector Type: (1) SC/UPC Supported Media: Single-Mode Fiber (SMF) Wavelength (XGS-PON): 1577 nm TX / 1270 nm RX Wavelength (XG-PON): 1577 nm TX / 1270 nm RX Data Rate (XGS-PON): 10 Gbps Downstream / 10 Gbps Upstream Data Rate (XG-PON): 10 Gbps Downstream / 2.5 Gbps Upstream Maximum Reach: Up to 20 km (dependent on fiber and link budget) Operating Temperature: 0 to 70° C (32 to 158° F)

Ubiquiti UISP-Box is a compact outdoor enclosure engineered to safeguard UISP Routers (UISP-R) and UISP Switches (UISP-S) in demanding environmental conditions. Constructed from UV-stabilised polycarbonate, this IPX6-rated weatherproof enclosure offers exceptional resistance to water ingress and dust, ensuring reliable operation and longevity for your critical networking equipment. Its versatile mounting design supports both pole (35 to 60 mm diameter) and wall installations, providing deployment flexibility, while its high wind endurance of up to 200 km/h ensures stability in exposed locations. Note that the UISP Power TransPort Cable, required for operation, is sold separately.

You can use the EdgeRouter Rack Mount Kit to mount the EdgeRouter 4 or EdgeRouter 6P in a standard 1U high rack.

5 Gigabit RJ45 ports with passive PoE support 1 Gigabit SFP port for backhaul applications Ports configurable for line-rate, Layer-2 switching 260 kpps for 64-byte packets 1 Gbps for 1518-byte packets

The Ubiquiti UISP-FIBER-XG is a high-performance GPON ONU/ONT designed for delivering rapid fibre-to-the-home (FTTH) connectivity, featuring an XG-PON port for up to 10 Gbps downstream and 2.5 Gbps upstream, coupled with a 2.5 GbE RJ45 LAN port and support for 24V passive PoE input, making it an ideal solution for bridge mode operation in advanced fibre optic networks.

The UISP Router is a eight-port, Gigabit PoE router designed for MicroPoP applications and supporting secure, large-scale networks. 8x GbE RJ45 ports with 27V passive PoE output 1x SFP port 110W (27V) total PoE availability, 15W/port (2-pair) / 30W/port (4-pair) When powered with the included AC/DC adapter. Traffic shaping functionality and automated customer suspension Firewall and OSPF routing

The UISP Router PRO is designed for ISP applications Key Features: 9x GbE RJ45 ports 4x 10G SFP+ ports Traffic shaping functionality and automated customer suspension Firewall and OSPF routing Additional Power TransPort input for DC redundancy Integrated Layer 2 switch* Up to 9,500 Mbps NAT throughput **Ports 1-8, 10-13 can be configured for line-rate Layer 2 switching.**Up to 2,250 Mbps with QoS enabled; up to 7,500 Mbps with IP Accounting enabled.

The Ubiquiti UISP UFiber Coexistence WDM Filter (UACC-UF-WDM-XGS) is a Wavelength Division Multiplexing module designed for service providers. It enables the simultaneous operation of XGS/XG-PON and GPON services over a single optical fiber. This filter effectively combines the different wavelengths, allowing for a straightforward upgrade path or the deployment of multiple services on existing fiber infrastructure without needing to run additional cables. The UACC-UF-WDM-XGS is an essential component for building a scalable and cost-effective fiber-to-the-home (FTTH) network.

The Ubiquiti UISP UFiber Active Ethernet UACC-AE is a fiber-to-copper media converter that allows service providers to deliver active fiber connections to customer premises and connect them to standard Ethernet equipment lacking SFP ports. It features one 1 Gbps SFP port and one 10/100/1000 Mbps RJ45 Ethernet port. The device can be powered by 802.3af PoE or 24V passive PoE. Networking Interfaces: (1) 1 Gbps SFP Port, (1) 10/100/1000 Mbps RJ45 Port Power Method: 802.3af PoE (Pins 1, 2+; 3, 6-), 24V Passive PoE (Pins 4, 5+; 7, 8-) Max. Power Consumption: 1.5W Supported Voltage Range: 16 to 57V Operating Temperature: -40 to 60° C (-40 to 140° F) Operating Humidity: 10 to 90% Noncondensing

The Ubiquiti UISP UFiber GPON OLT SFP Module B+ is a Class B+ GPON Optical Line Terminal (OLT) transceiver designed for use in UFiber OLT devices. It supports single-mode fiber connections with an SC/UPC connector and operates at asymmetric speeds of 2.5 Gbps downstream and 1.25 Gbps upstream over a distance of up to 20 km. Supported Media: Single- RX Wavelength: 1310 nm TX Power Range: 1.5 to 5 dBm RX Power Range: -28 to -8 dBm Downstream Data Rate: 2.5 Gbps Upstream Data Rate: 1.25 Gbps Cable Distance: 20 km