Ubiquiti

The Ubiquiti UniFi UACC-OM-SM-10G-D-2 includes two (2) UniFi 10G Single-Mode SFP+ (Small Form-factor Pluggable Plus) modules designed for long-reach single-mode fiber (SMF) connections. Each module supports a data rate of 10 Gbps and is used for high-speed links over longer distances. Form Factor: SFP+ Connector Type: (1) LC Duplex per module Supported Media: Single-Mode Fiber (SMF) Wavelength: 1310 nm Data Rate: 10 Gbps Maximum Reach: Up to 10 km (dependent on fiber and link budget) Operating Temperature: 0 to 70° C (32 to 158° F) Quantity: 2 modules per pack

The Ubiquiti UniFi includes two (2) UniFi 10G Bidirectional Single-Mode SFP+ (Small Form-factor Pluggable Plus) modules designed for single-strand single-mode fiber (SMF) connections. These modules utilize different wavelengths for transmit (TX) and receive (RX) over a single fiber, allowing for cost-effective long-distance 10 Gbps links. They are typically sold in pairs where one module transmits at one wavelength and receives at another, and the partner module does the opposite. Form Factor: SFP+ Connector Type: (1) LC Simplex per module Supported Media: Single-Mode Fiber (SMF) Wavelength (Module A): 1270 nm TX / 1330 nm RX Wavelength (Module B): 1330 nm TX / 1270 nm RX Data Rate: 10 Gbps Maximum Reach: Up to 10 km (dependent on fiber and link budget) Operating Temperature: 0 to 70° C (32 to 158° F) Quantity: 2 modules per pack (intended for use as a pair)

The Ubiquiti UPL-Amp-B is a high-end WiFi 5 speaker amplifier, equipped with dual Gigabit Ethernet ports, designed for exceptional multi-zone audio streaming and rich spatial sound. It supports low-latency wireless streaming via Apple AirPlay 2 and Spotify, delivering 130W per channel at 8 ohms. The device includes two speaker terminal outputs with custom-designed banana plugs, an RCA analog subwoofer output, and dual RCA analog inputs for left and right channels. Additionally, it features an HDMI eARC input for Dolby Atmos-powered immersive sound and a 1.43" touchscreen rotary knob for intuitive control.

The Ubiquiti UniFi Switch Pro 48 PoE USW-Pro-48-POE is a Layer 3 managed Gigabit Ethernet switch ideal for enterprise networks. This 1U rack-mountable switch features 48 ports, with 40 supporting 802.3at PoE+ (up to 30W per port) and 8 supporting 802.3bt PoE++ (up to 60W per port), delivering a total PoE power output of 600W. This high-capacity power supply enables efficient powering of access points, IP cameras, and IP phones. Four 10G SFP+ uplink ports offer high-speed connectivity. Advanced Layer 3 capabilities include inter-VLAN routing, static routing, and DHCP server functionality. The switch is managed via the UniFi Network application version 5.10.5 or later and consists of a 1.3-inch touchscreen for local monitoring. It operates on a universal AC power supply (100–240V) and supports optional DC backup via the UniFi SmartPower RPS (sold separately). Certified CE, FCC, and IC compliant. Key features: 48 Gigabit Ethernet ports with PoE+ and PoE++ support 600W total PoE budget for powering multiple devices Four 10G SFP+ uplinks for high-speed fibre connections Advanced Layer 3 features, including a DHCP server and routing 1U rack-mountable with 1.3-inch touchscreen for easy monitoring AC power with optional SmartPower RPS backup CE, FCC, and IC certified

The Ubiquiti USW-Pro-HD-24-PoE is a configurable 24-port, Layer 3 switch with a total 600W PoE power budget. It features sixteen Gigabit RJ45 ports with 802.3at PoE+ and eight Gigabit RJ45 ports with 802.3bt PoE++, making it suitable for powering a wide range of devices such as access points, IP cameras, and VoIP phones. For high-capacity uplinks, the switch includes two 10G SFP+ ports. This UniFi switch supports a rich set of Layer 2 capabilities and integrates Layer 3 functionality, including inter-VLAN routing, static routing, and a DHCP server. Near-silent cooling and a 1.3-inch touchscreen for status information make it a versatile choice for various professional installations. Managed with the UniFi Network Application, the USW-Pro-HD-24-PoE allows for centralised configuration, monitoring, and management of your network from a single interface. It is an ideal solution for building a high-performance, scalable network in South African businesses and enterprises.

The Ubiquiti UniFi USW-Pro-HD-24 is a professional-grade Layer 3 managed switch engineered for high-density, high-bandwidth network environments. It features 22x 2.5 Gigabit Ethernet RJ45 ports, 2x 10 Gigabit Ethernet RJ45 ports, and 4x 10 Gigabit SFP+ ports, providing a substantial 230 Gbps switching capacity and 115 Gbps non-blocking throughput. This switch incorporates UniFi's innovative Etherlighting™ technology for illuminated port identification (location, speed/link, VLAN), enhancing network visibility and troubleshooting. With advanced Layer 3 routing capabilities (e.g., static routing, inter-VLAN routing, DHCP server) and comprehensive Layer 2 features, it offers robust traffic management and security. The USW-Pro-HD-24 is designed for rack-mount deployment, includes a 1.3" touchscreen LCM for real-time status, and is managed seamlessly through the UniFi Network application, making it an ideal solution for demanding enterprise and pro AV networks.

Ubiquiti's UniFi USW-Pro-Max-16-PoE 16-port Layer 3 Etherlighting™ switch. Featuring 2.5 GbE, PoE++ ports, 10G SFP+, and 180W PoE power, this fanless, silent switch offers versatile mounting options for desktop, wall, or rack. Etherlighting™ ports illuminate for easy monitoring of speed, link, and network status.

Ubiquiti UniFi USW-Pro-Max-48-PoE (720W) is a powerful Layer 3 managed switch featuring 48 Gigabit Ethernet ports, 32 of which support PoE+ and PoE++ for powering UniFi devices. With a total PoE power budget of 720W, this switch offers reliable power delivery for high-demand devices. It also includes 10G SFP+ ports for high-speed uplinks, and its fanless design ensures silent operation, making it suitable for large-scale network setups.twork.

The Ubiquiti UniFi USW-Pro-Max-16 16-port Layer 3 Etherlighting™ switch with 2.5 GbE speed, features a illuminated ports for easy identification, versatile mounting options (desktop, wall, rack), and a silent, fanless cooling system. With (4) 2.5 GbE RJ45, (12) GbE RJ45, and (2) 10G SFP+ ports, it's the perfect solution for efficient network management.

The UniFi Pro XG 10 PoE is a compact, high-speed Layer 3 switch designed for aggregation and PoE delivery in smaller networks. It offers 10× 10GbE PoE+++ RJ45 ports and 2× 10G SFP+ uplinks, with a 240 Gbps switching capacity and 400W PoE budget. Ideal for edge switching, surveillance hubs, or powering multi-gig access points, it supports Layer 3 features including static routing and DHCP server functionality. With full UniFi Network integration and advanced traffic visibility, it balances enterprise-class performance in a space-efficient chassis.