MikroTik

MikroTik RB-CSS610P SwOS smart switch with 8x Gigabit PoE ports, 2x 10Gbps SFP+ ports, powered via DC Jack or included IEC power cord for flexible use.

The MikroTik RBSFP-SM+ is a 10G SFP+ transceiver module designed for long-range single-mode fibre optic connectivity. Operating at a 1310 nm wavelength, it supports data transmission speeds up to 10 Gbps over distances up to 20 kilometres. Suited for data centres, ISPs, and high-bandwidth network infrastructure, the module features LC duplex connectors and complies with SFP+ MSA and IEEE 802.3ae standards. Its hot-swappable design allows easy installation and maintenance without disrupting network operations. Key features: 10 Gbps data rate Single-mode fibre support 1310 nm wavelength Up to 20 km transmission distance LC duplex connectors Compliant with SFP+ MSA and IEEE 802.3ae standards Hot-swappable design

The CRS312-4C+8XG-RM is a Cloud Router switch with 10G RJ45 Ethernet ports. It also has 4 10G combo ports which can be used for 10G RJ45 Ethernet or 10G SFP+ for when you need an additional fibre connection. The combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected so you can use RouterOS scripting to decide which combo ports should be active.

Experience unprecedented speed and performance with the CRS310-8G+2S+IN, featuring an impressive 2.5/10 Gigabit combo. This device offers an excellent upgrade for your workspace, fully harnessing the power of the advanced RouterOS v7. With this switch, you can efficiently run VLANs, Jumbo frames, link aggregation, and ACL rules among many other features.

The MT-RBCRS317-1G-16S+R is a rack-mountable manageable switch with Layer3 features. It features 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. New features such as hardware-based Spanning Tree Protocol (MSTP) and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.

The CRS326-24G-2S+RM is a SwOS powered 24 port Gigabit Ethernet switch with 2 SFP+ ports. Non-blocking Layer 2 switching capacity 16K host table IEEE 802.1Q VLAN Supports up to 4K simultaneous VLANs Port isolation Port security Broadcast storm control Port mirroring of ingress/egress traffic Rapid Spanning Tree Protocol Access Control List MikroTik neighbor discovery SNMP v1 Web-based GUI

The MikroTik CRS328-4C-20S-4S+RM is a 28-port 1U rackmount managed switch built for high-performance and high-density networking environments. It features 20 SFP ports, four 10G SFP+ ports, and four combo ports that support either Gigabit Ethernet or SFP interfaces. Powered by an 800 MHz ARM 32-bit 98DX3236 CPU with 512 MB RAM and 16 MB flash storage, it delivers reliable throughput for complex configurations. Dual 100–240V AC power supplies ensure failover protection for uninterrupted operation. Supporting both RouterOS (Level 5) and SwitchOS, it offers flexibility for administrators to choose between advanced routing or simplified switching. Key features: 20x SFP ports, 4x SFP+ ports, and 4x combo (RJ45/SFP) ports ARM 800 MHz CPU, 512 MB RAM, 16 MB flash Dual-boot: RouterOS Level 5 and SwitchOS Dual 100–240V AC power supplies for redundancy Max power consumption: 43 W 1U rackmount form factor Suitable for high-density, fibre-based network deployments

If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments.

The MikroTik CRS354-48P-4S+2Q+RM is a 1U rackmount Layer 3 switch designed for enterprise networks and data centres. It features 48 Gigabit Ethernet ports with PoE+ support (802.3af/at and passive PoE), delivering up to 26W per port and a total power budget of 750W. Four 10G SFP+ ports and two 40G QSFP+ ports provide high-speed fibre uplinks for aggregation and backbone connectivity. The integrated Marvell Prestera switch chip manages all Gigabit ports, ensuring reliable hardware-based switching performance. The switch includes dual hot-swappable power supplies and dual boot options, supporting both RouterOS (Level 5 license) and SwOS for flexible switching or routing configurations. Advanced features such as VLANs, QoS, ACLs, and Layer 3 routing make it suitable as a core or distribution switch in large networks, simplifying infrastructure and reducing power cabling requirements. PoE capabilities support powering access points, IP cameras, and VoIP phones. Key features: 48× Gigabit Ethernet ports with PoE+ (802.3af/at and passive) 750W total PoE power budget, up to 26W per port 4× 10G SFP+ ports 2× 40G QSFP+ ports Integrated Marvell Prestera switch chip Dual hot-swappable power supplies Dual boot with RouterOS (Level 5) and SwOS Advanced VLAN, QoS, ACL, and Layer 3 routing capabilities